XQ100 Four Linear Guideways Gantry Milling Head
1. It is a peerless square ram in the market with hi-low shift design.
2. The transmission connecting rod between motor and spindle just needs loading motor’s torque, which can effectively optimizes temperature rise, noise level and resonance frequency of ram cavity.
3. New design without oil seal inside saves timeliness consumable, extends parts service life and increases availability.
4. Employ Japanese bearings and grinding grade gears which are sturdy and durable.
Inquiry Now
| Item \ Model | XQ100 |
| Linear Guide Rail | Type 55 Linear Guide Rail |
| Ram Travel | 1000mm, 1200/1300mm (Opt.) |
| Spindle Type | BBT 50 Ø190 / Shaft Ø100 |
| Spindle Speed | 6000RPM / min |
| Spindle Shifts | Hi-low Two Step Shifts (Gear Module M3.5) |
| Spindle Gear Ratio | Hi Shift 1:1.075 ; Low Shift 1:5.2 |
| Motor Output | 15kw~30kw |
| Max. Torque | 1500 N.m |
| Spindle Lubrication | Grease |
| Spindle Gear Shift | Gear Shift by Hydraulic Cylinder (Including Hydraulic Cylinder) |
| Tool Unclamp | By Hydraulic Cylinder (Floating Type Tool Unclamp Device Including Hydraulic Cylinder) |
| Clamping Pull-force | 1850 kgw |