OY-T5 Milling Head
1. This milling head is one of our conventional milling head series, and most suitable forinstalling to gantry milling machine, single arm milling machine and special purpose
machine as heavy duty cutting.
2. Its inner wall is thicker, and its main body is rigid.
3. The spindle of the milling head is made of Japan material and NSK bearings. The inner
driving system has passed strict quality inspection, and is sturdy and durable. It functions
very well.
4. Travel: 400mm
5. It can work together with our Φ250 right angle milling head (angle head) to proceed with
five-side milling.
Inquiry Now
.jpg)
| Item \ Model | OY-T5 |
| Spindle Motor | 9kw,12.5HP / 11kw,15HP Three-phase Induction Motor |
| Spindle Taper | ISO 50(7:24) |
| Diameter of Spindle Nose | 128.57mm |
| Steps of Spindle Speed | 6 Section |
| Spindle Speeds (Standard Type) |
4P 50c/s 97, 146, 220, 330, 450, 675 4P 60c/s 117, 175, 264, 396, 540, 810 |
| Max. Diameter of Cutter | 200mm |
| AC Motor | 0.75kw,1HP Recuction Ratio 1:20 |
| Rapid Feed Rate / Per Minute | 50c/s 365mm/min ; 60c/s 450mm/mim |
| Travel | 400mm |
| Vertical Moving Distance (By Handwheel) |
0.5mm/per full revolution ; 0.005mm/per divison |
| Weight | Approximately 600 Kg |